Umshini wokuhlola we-electronic torsion Isithombe esifakiwe

Umshini wokuhlola we-electron torsion

Ilungele ukuhlola ukusebenza kwe-tensile kanye ne-torsional yamantongomane okukhiya okuphezulu.Okuqukethwe kokuhlola kufaka phakathi itorque yokukhiya, ukusonta itorque, amandla okuqinisa ngaphambili kanye netorque exegayo, njll. Itorque yokukhiya isho itorque enkulu ngesikhathi senqubo yokugoqa, futhi indawo yesampula ingasethwa;i-torque exegayo isho i-torque ejikelezayo ngaphansi komthwalo we-axial, okungukuthi, i-torque ephezulu noma encane endaweni yokuphuma, futhi indawo yesampula ingasethwa.Amapharamitha afana nepharamitha ye- friction ephelele µtotal, ipharamitha yokushayisana kwentambo engu-µthread, i-coefficient yokushayisana kobuso ekugcineni µi-endface, kanye ne-coefficient eqinisayo K ingatholwa.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Imininingwane yomkhiqizo

测试机器类型	EHLN-5504-202型	I-EHLN-5205-502型	EHLN-5505-203型
最大拉力 (kN)	50	200	500
最大扭矩 (Nm)	200	500	2000
测量范围	0.2 至 100%
测量准确性	优于指示值±1%,±0.5%
速度范围(./分钟)	0.01~360 (可扩展至720）或非标定制
张力、扭矩分辨率	未分级和恒定分辨率 ±1/300000FS(满量程）
螺栓规格 (mm)	I-M3 至 12	M6 ~ 20	m8 ~ 32
螺栓长度(毫米)	20 kuya ku-100	20 ~ 150	40 ~ 200
主机电机功率 (千瓦)	1.0 kW	2.OKW	3.OKW

Umshini wokuhlola ojwayelekile

1. Umshini wokuhlola ukhiqizwa ngokuvumelana ne-JB/T 9370-1999 "Technical Conditions for Torsion Testing Machines".

2. Umshini wokuhlola usekelwe ku-GB/T10128-1998 "I-Metal Room Temperature Torsion Test Method", i-GJB715.13 "Indlela Yokuhlola Ukulayisha Ngaphambili Yeziqinisi Ezifakiwe Ezifakiwe", i-MIL-STD-1312, i-Test16 "Indlela Yokuhlola Ukulayisha kuqala" namanye amazinga Yenza izivivinyo ukuze unikeze idatha.

3. Umshini wokuhlola ungaphinda wenze izivivinyo futhi unikeze idatha ngokuya ngamazinga aseYurophu afana ne-EN-14399-1:2005, EN-14399-3～6:2006 kanye ne-ISO 898-1:1999.